반응형
사실... 자료만 수집하고 시도해 보진 않은 자료들입니다... -_-;;
실 서버에 바로 적용하기에는 무리라고 판단 했었습니다.
내 PC에 그런 현상이 생기면 좋으련만....... 발생 안 하더군요..
그래서... 어째 실제로 적용해 보지도 못 하고 모아만 뒀던 자료인데....
혹시라도 누군가.. 프로그램 추가/제거가 실행이 안 되면... 이거 함 테스트 해 주세요 ^^;;
물론~ 포맷해도 상관 없다는 전제하에서여...;;
!! CAUTION!! 미리 말해드리지만 테스트를 안 해본 자료 입니다 !!CAUTION!!
프로그램 추가/제거 실행 안 될때.. 시도해 볼 것...
해 보진 않았다 -_-a
해 보진 않았다 -_-a
-- 구글링 해서 수집한 자료들.
익스플로러 오류라고 복구하거나 재 설치 하라는 문건을 발견..
But.... 익스플로러를 재 설치 한다는게 껄쩍지근 하다. 재설치후 윈도우가 엉망이 되는 경우가 있다고 한다.
But.... 익스플로러를 재 설치 한다는게 껄쩍지근 하다. 재설치후 윈도우가 엉망이 되는 경우가 있다고 한다.
-- 여담..
그룹정책에서 사용자가 프로그램 추가/제거를 실행 못 하도록 하는 정책이 있다고 한다. 이걸 먼저 확인 한다.
그룹정책에서 사용자가 프로그램 추가/제거를 실행 못 하도록 하는 정책이 있다고 한다. 이걸 먼저 확인 한다.
실행 > gpedit.msc
그룹 정책 개체 편집기 > 사용자 구성 > 관리 템플릿 > 제어판 > 프로그램 추가/제거 > [프로그램 추가/제거] 제거
--MS 공식 사이트에서 발췌해서 정리한 거 같은 자료. MS 사이트 링크 되어 있다.
(http://support.microsoft.com/kb/q266668/)
(http://support.microsoft.com/kb/q266668/)
I ran into the same problem, and none of the recommended solutions worked.
Finally I found the answer.
This is taken from MS Knowledge Base Article Q266668 which can be found at
Finally I found the answer.
This is taken from MS Knowledge Base Article Q266668 which can be found at
I did not bother with steps 1-4 (checking registry entries).
The following command fixed it:
The following command fixed it:
Follow the steps in one of the following procedures, as it applies to your computer,
and then test to determine if this issue is resolved.
If the issue is resolved, skip the remaining steps.
If the issue is not resolved, go to step
5. To resolve this issue with Internet Explorer 6.0 installed, repair Internet Explorer 6.0:
a. Click Start, and then click Run.
b. Paste the following command in the Open box, and then click OK:
rundll32 setupwbv.dll,IE6Maintenance "C:\Program Files\Internet Explorer\Setup\SETUP.EXE" /g "C:\WINDOWS\IE Uninstall Log.Txt
Because this command is case sensitive,
Microsoft recommends that you copy the command from this article, and then paste the command in the Open box.
and then test to determine if this issue is resolved.
If the issue is resolved, skip the remaining steps.
If the issue is not resolved, go to step
5. To resolve this issue with Internet Explorer 6.0 installed, repair Internet Explorer 6.0:
a. Click Start, and then click Run.
b. Paste the following command in the Open box, and then click OK:
rundll32 setupwbv.dll,IE6Maintenance "C:\Program Files\Internet Explorer\Setup\SETUP.EXE" /g "C:\WINDOWS\IE Uninstall Log.Txt
Because this command is case sensitive,
Microsoft recommends that you copy the command from this article, and then paste the command in the Open box.
-- 레지스트리 건드리는 거네.. 시도하기 무섭다 -_-
If the Add/Remove Programs applet does NOT open, or flashes briefly, you may have some missing registry entries.
To fix the problem:
1. Open a CMD.EXE prompt.
2. Type regsvr32 mshtml.dll and press Enter and OK.
3. Type regsvr32 shdocvw.dll -i and press Enter and OK.
4. Type regsvr32 shell32.dll -i and press Enter and OK.
regsvr32 appwiz.cpl 이거두 있다. (appwiz.cpl이 프로그램 추가/제거의 실행 파일이다)
그리도 또 하나 더 ~
--------------------------------------------------------------------------------
Windows 2000 Add/Remove Programs Tool Does Not Open
Article ID : 329891
Last Review : February 28, 2007
Revision : 2.2
Last Review : February 28, 2007
Revision : 2.2
SYMPTOMS
When you try to open the Add/Remove Programs tool in Windows 2000,
it does not open and you do not receive an error message.
The window may appear briefly, but then it disappears.
When you try to open the Add/Remove Programs tool in Windows 2000,
it does not open and you do not receive an error message.
The window may appear briefly, but then it disappears.
CAUSE
This issue may occur if a registry entry is missing.
This issue may occur if a registry entry is missing.
RESOLUTION
To resolve this issue, add the missing registry entries:
To resolve this issue, add the missing registry entries:
1. Click Start, and then click Run.
2. In the Open box, type cmd, and then press ENTER.
3. In the Command window, type regsvr32 mshtml.dll, and then press ENTER.
4. Click OK to confirm that the registry entry has been added.
5. In the Command window, type regsvr32 shdocvw.dll -i, and then press ENTER.
6. Click OK to confirm that the registry entry has been added.
7. In the Command window, type regsvr32 shell32.dll -i, and then press ENTER.
8. Click OK to confirm that the registry entry has been added.
9. Close the Command window.
2. In the Open box, type cmd, and then press ENTER.
3. In the Command window, type regsvr32 mshtml.dll, and then press ENTER.
4. Click OK to confirm that the registry entry has been added.
5. In the Command window, type regsvr32 shdocvw.dll -i, and then press ENTER.
6. Click OK to confirm that the registry entry has been added.
7. In the Command window, type regsvr32 shell32.dll -i, and then press ENTER.
8. Click OK to confirm that the registry entry has been added.
9. Close the Command window.
자~~ 이제 부담 없는 환경에서 발생했을 경우 테스트 해 주실 분 ^^;;;;;;;;;;;;;;;;;;;;;;;
반응형
댓글